Compx-elock Latch Upgrade Manual de usuario

Refrigerator Kit1CompX eLock • compx.com Included in this kit are (shown left to right, top to bottom):k Refrigerator lock housingk Motorized lat

Refrigerator Kit2CompX eLock • compx.comStep 1Remove the existing refrigerator lock and strike from the refrigerator that it is installed upon.St

Refrigerator Kit3CompX eLock • compx.com4C – Using large slotted screwdriver, deflect housing wall to allow to battery box to be removed.Step 5 – Remov

Refrigerator Kit4CompX eLock • compx.comStep 6 – RefuRbiShing the elockGather the following parts. They are all needed to refurbish the refr

Refrigerator Kit5CompX eLock • compx.comStep 10Turn refrigerator lock housing and main access unit assembly over. Line up screw holes in housing with

Refrigerator Kit6CompX eLock • compx.comStep 13Snap connector into housing.Step 14 – inStall new latchGather the new latch, the long silver screws and

Refrigerator Kit7CompX eLock • compx.comStep 16Tighten screws with a #2 Phillips screwdriver.Step 17 – making final connectionSInstall the latch wire

Refrigerator Kit8CompX eLock • compx.comStep 19 (continued)Step 20Important: New strike will need to be relocated as per instructions listed below.Rep

Refrigerator Kit9CompX eLock • [email protected] Box 200Mauldin, SC 29662Copyright 2009 © CompX Security Products.C